add wishlist add wishlist show wishlist add compare add compare show compare preloader
  • phone +91 7396 777 800 / 600 / 300
  • electro-marker-icon Store Location
  • Currencies
    • INR
    L/A
Sony LED TV 5 Blinks Problem: What It Means & How to Fix It

Sony LED TV 5 Blinks Problem: What It Means & How to Fix It

Sony LED TV 5 Blinks Problem: What It Means & How to Fix It

Is your Sony LED TV blinking red light 5 times and refusing to start? Don’t worry—this is a common issue, and the solution is often simpler (and cheaper) than you might think.

This blog will guide you through what the 5 blinks mean, how to troubleshoot it, and where to get genuine Sony TV parts online from a trusted source: Great Bharat Electronics.


🔴 What Does the 5 Blinks Error Mean?

When your Sony TV’s red standby light blinks 5 times, it’s typically pointing to a T-CON board failure or an LCD panel issue. These components control your TV’s display, and when something goes wrong, your TV can stop functioning properly.

If you’re looking to fix this, you’ll likely need to replace a faulty part—and for that, we recommend visiting Sony TV Spare Parts – Great Bharat Electronics.


🛠️ Common Causes of the 5 Blinks Error

  • Faulty T-CON board

  • Damaged LCD panel

  • Loose or disconnected ribbon cables

  • Mainboard failure

  • Power surge or heat-related damage


✅ How to Fix the Sony LED TV 5 Blinks Issue

1. Perform a Power Reset

Unplug your TV, hold the power button on the TV itself for 30 seconds, then plug it back in and power on.

2. Check Internal Cables

Loose ribbon cables between the mainboard and T-CON board can trigger this issue. If you're experienced, open the back panel and inspect the connections.

3. Replace the T-CON or Mainboard

Once you’ve identified the faulty component, replace it using genuine Sony parts. Avoid fake or second-hand parts—they can cause more damage.

You can find original Sony T-CON boards, mainboards, and more at
👉 Buy Genuine Sony TV Parts from Great Bharat Electronics


🔦 Bonus: Flashlight Test

To check if your TV has a backlight or panel issue:

  • Turn it on and shine a flashlight close to the screen.

  • If you see a faint image: It’s likely a backlight or T-CON issue.

  • No image at all? Possibly the mainboard or LCD panel is damaged.

Need a new board? Browse the full range of original parts at Sony TV Spares Store – Great Bharat Electronics.


📞 Still Need Help?

For out-of-warranty repairs or technician assistance, source your parts from
➡️ Trusted Sony TV Parts Seller – Great Bharat Electronics


🧠 Repair or Replace?

Issue Recommended Action
T-CON board failure Replace it using Genuine Sony Parts
LCD panel damage Consider replacing the TV
Mainboard issue Replace with a trusted original part
TV older than 10 years Consider an upgrade

Final Thoughts

The 5 blinks issue on Sony LED TVs is usually caused by a faulty T-CON board, mainboard, or panel connection. Many of these issues are repairable with the right parts.

If you're repairing your TV, trust only original Sony components.
🛒 Shop online at Sony TV Parts – Great Bharat Electronics for:

  • ✅ 100% Genuine Products

  • ✅ PAN India Shipping

  • ✅ Trusted by Technicians

Light
Dark